top of page
AdobeStock_157224900.jpeg

Plastering Machine VR1

Verputzmaschine VR1.png

The VR 1 plastering machine (in the versions 230 V with frequency converter, 400 V with frequency converter or switchable 230/400 volt) is suitable for all machine-compatible ready-mix dry mortars. Depending on the requirements, it is possible to use bagged material or, by means of a 

silo material by means of a commercially available conveying system. 

Technical data

Drive:

Connection:

Fuse Protect:

Water connection:

Delivery rate:

Delivery range:

 

Operating pressure:

Air compressor:

230 Volt FU

400 Volt 

230 V/ 50 Hz/ 3 kW

355 rpm

 

230 V/ 16 A

1 x 16 A inert

 

3/4“ at least 2,5 bar with machine running 

3 - 20 l/min*

10 - 15 m 

max. 20 bar 

230 V/ 50 Hz

0,6 kW/ 0,18 Nm /min 

400 V/ 50 Hz/ 5,5 kW

400 rpm

400 V/ 32 A

3 x 20 A inert 

 

 

6 - 40 l/min*

depending on hose

diameter up to 50m 

max. 30 bar 

400 V/ 50 Hz

0,9 kW/ 0,25 Nm /min 

3

3

230 Volt / 400 Volt

400 V/ 50 Hz/ 5,5 kW 400 rpm

or 

230 V/ 50 Hz/ ca. 3 KW 355 rpm

 

400 V/ 3 x 20 A inert

230 V/ 1 x 16 A inert

3 - 40 l/min*

depending on hose 

diameter up to 50m 

max. 30 bar 

230 V/ 50 Hz

0,6 kW/ 0,18 Nm /min 

3

* depending on material, hose length and pump type 

The machine can be supplied for any required voltage with frequency converter or switchable.

For more information, feel free to download the corresponding data sheet!

MORE PLASTERING MACHINES

Verputzmaschine VR6
Verputzmaschine VR8
bottom of page