top of page
AdobeStock_157224900.jpeg

Plastering Machine VR6

Verputzmaschine VR6

The VR 6 plastering machine is suitable for all machine -compatible dry mortars. Depending on the requirements, it is possible bagged material or silo material by means of a commercially available conveyor system. The dry mortar is conveyed to the mixing pump via the inclined cellular wheel. In the mixing pump, the material is mixed under metered water supply and then conveyed through the mortar hose by a highly wear-resistant, extremely pressure-stable worm pump. 

Technical data

Drives:

Connection:

Fuse protection:

Water connection:

Delivery rate:

Delivery distance:

 

Operating pressure:

Air compressor:

Pump motor: 400 V/ 50 Hz/ 5,5 kW / 400 rpm

Cellular wheel motor:   400 V/ 50 Hz/ 0,55 kW/ 28 rpm

400 V/ 32 A

3 x 25 A

3/4" at least 2,5 bar with machine running

5-85 l/min depending on pump type 22l as standard 

Hose diameter 25 mm max. 30 m 

Hose diameter 35 mm max. 50 m 

Floating screed up to 80 m

max. 30 bar 

0,9 kW/ 0,25 Nm /min 

The machine can be supplied with FU or switchable for any voltage required.

optionally also switchable

3

For more information, feel free to download the corresponding data sheet!

MORE PLASTERING MACHINES

bottom of page